Company News

I. Basic conditions of construction projects

Project Name: 50 tons of cosmetic raw material arbutin project

Construction Scale and Content: The company plans to purchase home-made equipment such as enamel reaction kettles, stainless steel centrifuges, and stainless steel dryers. After the completion of the project, the company will have an annual production capacity of 50 tons of arbutin, a cosmetics raw material, with a sales income of 40 million yuan, a profit tax of 7.5 million yuan, and a technological process: pentaacetyl glucose, monoacetylhydroquinone (synthetic)-pentaacetyl bearberry Glycosides (hydrolyzed) - arbutin.

Construction site: No. 88, Nanhu Road, Zhongguan Town, Deqing County, Huzhou City (the company's existing factory area).

Project investment: The total investment is 30 million yuan.

 

II. Distribution of major environmental sensitive targets in the scope of environmental impact assessment

project	Protection goals		position	Nearest distance（m）				Protection level
				Factory sector	Sewage station (biochemical pool)	Tank area	Arbutin workshop
Water Environment	Yangxi Port		S	Close to	~260	~10	~35	Target water quality is Class III functional area
Ambient air	Sandun Village	Sandun Village1	N	~40	~75	~345	~315	Environmental air second functional area
		Sandun Village2	NE	~1100	~1150	~1450	~1400
	Nanhu Community	Nanhu Community	N	~315	~440	~690	~650
		Century Apartment	W	~110	~290	~330	~310
		Nanhu Garden	NW	~110	~310	~460	~430
	Zhong Guancun	Zhong Guancun	N	~1250	~1300	~1450	~1550
		Shangba Village1	W	~495	~640	~590	~580
		Shangba Village村2	SW	~610	~850	~660	~675
	Qingdun Village	Qingdun Village1	E	~260	~270	~520	~305
		Qingdun Village2	ESE	~1350	~1550	~1400	~1405
	Dongbadou	Yangkou Village	SSW	~690	~920	~700	~715
	Dongshe Dun Village	Dongshe Dun Village	WNW	~1300	~1500	~1550	~1500
noise	Sandun Village1		N	~40	~75	~345	~315	Acoustic Environment Type 2 Acoustic Environment Functional Area

III. the main environmental impact forecast

1, water environmental impact assessment

The wastewater of this project is treated by the Zhonghua Sewage Treatment Plant after being pretreated by the plant. At the same time, the plant area strictly implemented rainwater and sewage diversion, cleanup and diversion, and sewage diversion. All the sewage was included in the corresponding pipe network. Therefore, under normal circumstances, the impact on the inland water quality was small.

2. Air Impact Analysis

From the prediction results, it can be seen that the pollutants discharged under normal conditions after the implementation of the project meet the corresponding standard requirements for the maximum hourly landing concentration within the predicted range. According to the calculation results of the atmospheric environment protection distance, the project does not need to set the atmospheric environment protection distance.

3, noise impact assessment

The noise of this project is mainly the operating noise of various types of production equipment, supporting pumps, motors, fans, etc. After the attenuation of the wall and distance of the workshop, the noise value at the plant boundary can meet the “Emission Standard for Industrial Enterprise Environmental Emissions” (GB12348 -2008 ) The three standard requirements.

4. Analysis of solid waste impact

As long as the solid waste disposal measures proposed in this environmental assessment are strictly implemented, the solid wastes of this project can be safely and effectively disposed of, and the impact on the environment is small.

6. Environmental Risk Analysis

The project involves dangerous or toxic materials such as methylene chloride, butyl acetate, sodium methoxide, etc. There are certain environmental risks. Enterprises should strengthen risk prevention, prepare emergency plans, and allocate emergency equipment to prevent corresponding environmental risk accidents.

 

IV. The main environmental protection measures to be taken, environmental risk prevention measures and expected effects

 Table 2 List of pollution prevention measures

content Types of	main content	Expected governance effect
Exhaust gas	(1) Combining the characteristics of exhaust emissions, the proposed waste gas treatment plan is as follows: 1 The organic waste gas containing methylene chloride in the workshop is treated with secondary condensation (one-stage water condensation + first-degree frozen brine condensation at -15°C), and then it is connected to a secondary resin adsorption device, and desulfurization of exhaust gas is connected to the exhaust gas of the project. Processing device 2 Workshop water-soluble organic waste gas Ethanol, methanol, and methyl acetate are treated with secondary condensation (first-stage water condensation + first-degree frozen brine condensation at -15°C) to access the project's exhaust gas concentration treatment device (water absorption + secondary Alkali absorption device); 3 The dust in the workshop is directly discharged at high altitude after dust removal by the dust removal system of the equipment; 4 When the methyl acetate by-product is barreled, seals are required on the finished product barrel mouth, and the exhaust gas can be connected to the workshop exhaust gas pretreatment device. (2) The exhaust gas treatment plan put forward in this report has entrusted qualified units to carry out special designs to ensure that the exhaust gas can be discharged to a stable standard.	After treatment, the discharged methanol and dust exhaust gas meet the "Emission Standards for Integrated Air Pollutants Emission" (GB16297-96), and the exhaust gas of ethanol, acetic acid, methyl acetate, and methylene chloride meet the Occupational Exposure Limits of Harmful Factors in the Workplace - Chemical Harmful Factors. Emission Limits (GBZ2.1-2007)
Wastewater	(1) Some process wastewater of this project is preprocessed in the workshop. After treatment, the waste water is discharged into the plant sewage treatment station together with other waste water in the plant and discharged into the bell tube sewage treatment plant. (2) The factory has built a wastewater treatment station with a treatment capacity of 300t/d. It is required to do a good job of modulating water distribution for wastewater pretreatment and inflow of sewage treatment stations to ensure stable operation of the wastewater treatment station and stable export compliance. (3) The diversion of rain and sewage, the diversion of clean sewage, and the diversion of pollutants have been established in the plant area. It is forbidden to discharge the waste water directly into the total discharge outlet. The first 30 minutes of rainwater in the production workshop are collected and the collected rainwater is collected and transferred to the wastewater treatment station for processing. (4) Sewage ditches in the production workshop must have anti-corrosion measures and adopt elevated laying sewer pipes.	Surface water: Integrated wastewater implements the secondary standards of "Integrated Wastewater Discharge Standard" (GB8978-1996) and "Industrial Wastewater N,P Contaminant Indirect Emission Limits" (DB33/887-2013)
noise	The equipment of the project selects low-noise equipment for equipment selection and optimizes the layout. Take certain measures for noise reduction and noise reduction. Mufflers are installed in the import and export pipelines of fan-type equipment, anti-vibration gaskets are installed in large-scale high-noise equipment, production management is strengthened, maintenance is performed in time, and operating specifications are strengthened to reduce noise. Strengthening greening will help to further reduce noise sources.	The factory sector meets the three standards in the "Environmental Noise Emission Standard for Industrial Enterprises at the Plant Boundary" (GB12348-2008)
Solid waste	he solid wastes of this project are collected separately and stacked on the unified solid waste warehouses in the plant area according to the requirements, in which the hazardous wastes are entrusted by qualified units to be disposed of. General solid wastes are treated in accordance with the requirements of general solid wastes.	Realize resource, reduce and harmless
Groundwater and soil	(1) Diverting the sewage and collecting the initial rainwater into the sewage station; (2) The floor of the production workshop shall be hardened and seepage-proof. The cofferdams and floor drains shall be installed in the workshop in different production areas; (3) All the sewage and water supply pipelines shall be grounded or open trenches shall be implemented and shall be treated with anti-corrosive hardening;	Avoid leakage of soil and soil

 

 

V. Environmental Impact Assessment Conclusions

Zhejiang Tuopu Pharmaceutical Co., Ltd. has an annual output of 50 tons of cosmetics raw material arbutin. The site of the project is located in the functional zone of Zhongguan Industrial Zone. The infrastructure in this area is relatively complete, and the environmental conditions are relatively superior. It is in line with the planning of the environmental function zone, the planning of the main function zone, Land use planning, urban and rural planning requirements; Emissions of pollutants comply with the national, provincial standards for pollutant discharge; Emissions of pollutants through the factory to "new with the old" reduction of balance; After the implementation of the project, the environmental impact of the project in line with the project The environmental quality requirements for the site's environmental functional zoning; this project has a high level of clean production and meets the requirements for cleaner production; the risk prevention measures of the project meet the corresponding requirements, and the product, production process and equipment of the project comply with national and local industrial policies. Claim.

Therefore, from the perspective of environmental protection, Zhejiang Tuopu Pharmaceutical Co., Ltd. has an annual output of 50 tons of arbutin, a cosmetic raw material project, which is feasible in the existing plant area.

 

VI.solicit opinions

Who should seek advice: Citizens, organizations or groups within the scope of the project's environmental impact assessment.

The scope of the opinions sought: opinions on the environmental aspects of the project, environmental protection measures, and attitudes towards the construction of the project.

Timeline and public comment feedback route: Feedback to the construction unit or the environmental assessment unit via email, telephone, letter, etc. Please be sure to leave your real name and contact information for our return visit. The starting and ending time for comments by the public is 10 working days from the publication of this public announcement on the website of Zhejiang Tuopu Pharmaceutical Co., Ltd. During the publicity period, the public may request the construction unit or the environmental impact assessment unit for a brief copy of the environmental assessment document for the project and supplementary information for the environmental impact assessment of the project.

 

VII. contact method

(1) Construction unit: Zhejiang Tuopu Pharmaceutical Co., Ltd.

Address: 88 South Hunan Road, Zhongguan Town, Deqing County

Contact: Xie Zaifa

Contact Tel: 13587939758

 

  (2) Environmental Impact Assessment Unit: Zhejiang Biyang Environmental Engineering Technology Co., Ltd.

Address:Room 503, China Star Century Building, 317 Wantang Road, Hangzhou City, Zhejiang Province, China

Tel: 0571-28257967

 

(3) Local Environmental Protection Department: Deqing County Environmental Protection Bureau

Address: No. 1, Qianqiu East Street, Wukang Township, Deqing County

Tel: 0572-8065679

 

(4) Environmental Protection Approval Department: Huzhou Environmental Protection Bureau

Address: 128 Changxing Road, Huzhou City

Tel: 0572-2668520

 

VIII. Publicity before the approval of the EIA report

 

 

 

 

 

 

 

Zhejiang Tuopu Pharmaceutical Co., Ltd.

April 3, 2018